1 / 5
Vice grips holder for honeycomb storage wall HSW with fusion 360 files
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vice grips holder for honeycomb storage wall HSW with fusion 360 files
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 371
- Wydruki
- 3
- Wyświetlenia
- 1051
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (1)Kolekcje (86)Powiązane
Vice grips holder for the Honeycomb Storage Wall (HSW). Larger and smaller version for different size of vice grips.
Includes the fusion 360 file to remix. Just adapt the user parameters in the file if neither of the stls work for your vice grips.
Note: You will also need to print one empty insert from the original HSW as this holder attaches to that and then the whole thing inserts into the storage wall.
| Print Settings | Setting |
| Walls | 5 |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | Any |
| Infill | 15% |
| Supports | None |
| Other | Print with the largest flat surface to the build plate |