Sans Amiibo Figure improved
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified NebulaNoobs Sans to fix some major modeling errors not visible from the outside.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 962
- Wydruki
- 1
- Wyświetlenia
- 2318
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Having printed the original NebulaNoob model as a 20cm tall statue I found major issues with the insides of the model that made printing take way more time and in general produce less pretty results when printed at a larger scale, so I decided to fix pretty much every issue I found in some way resulting in this remix.
The model can be printed as big or small as you want, but ive also cut it into smaller pieces and printed at 250% scale.
What I also learnt from the print of the original model is that the jaw and elbows will need better supports than you would probably expect for them to need so do not try to be cheap with them.
Thank you and happy printing!