Twotrees Sapphire SP3 SP5 mount for PI 3.5" Touchscreen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount to allow a Raspberry PI 3.5" touchscreen to be fitted in place of the original MKS Robin TFT35.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 1226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
When upgrading a TwoTrees printer to Klipper the original MKS TFT35 display is not compatible (at least I found no way of using it). However, common 3.5" Raspberry Pi touch screens are exactly the same size and work fairly well with KlipperScreen.
This mount holds the RPI 3.5" display in place of the MKS display. However, these displays normally plug directly into the Raspberry Pi and there is not enough room in the base of the Sapphire Pro for this. I made a simple breakout board to plug into the display and allow a ribbon cable to connect to the Pi. I have include some details and pictures here, but this will be up to you to sort out for yourself. Note, that my breakout board includes additional wires and a connector for RX/TX for a UART connection.