Vertical stand for a Lenovo ThinkCentre M900 "Tiny" computer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a Vertical Stand for this as Lenovo no longer makes it.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 1520
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Picked up a nice Lenovo ThinkCentre M900 “Tiny” computer at a flea market. (See photos)
I wanted to set it vertically on my workbench (it's controlling a Laser Engraving machine) but needed a stable stand for it. Seems like Lenovo no longer makes one for it, so I designed and 3D printed one myself. I made it so screw-on rubber feet can be easily installed using M3 x 6mm screws or, if you prefer, just use stick-on rubber feet. Personally I don't like the stick-on's as they tend to come off after a time and just when you don't want them to.
I used Ziro Matte Black PLA but that's just a matter of personal preference in this case. Use whatever works best for you.
Resolution was .2mm/layer with 80% infill and I printed mine on a Creality CR10 V2 printer.