Seatbelt Buckle Cover from 1990 Ford Econoline camper conversion by Sportsmobile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,52 € – 0,64 € netto (bez VAT)
Dla pliku: belt_buckle_cover_0.4n_0.3mm_PETG_MK3S_32m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,58 € netto (środek widełek).
- Masa podana przez autora
- 9 g
- Czas druku podany przez autora
- 31,8 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Replacement for the crumbling 33-year-old plastic cover of an otherwise good belt buckle in my camper van.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement for the crumbling 33-year-old plastic cover of an otherwise good belt buckle in my camper van.
My van is a 1990 Ford Econoline, but I think this particular belt buckle was an aftermarket part put in by the van conversion place: Sportsmobile in Elgin Texas.
Gcode: I oriented flat on the print bed to get the textured surface, but if you don't care about surface quality, print vertically instead so you don't need supports. My gcode used organic, on-model supports, so the interior ones required a knife to remove. If you know of a better way to print with the surface plate texture with fewer/better supports, please let me know in the comments.
Model: I'd be happy to share the Fusion 360 model if someone cares to modify/remix for their own needs. In hindsight, a sacrificial bridge may have been a good approach to solve the aforementioned supports problem.
Obligatory Safety Warning: This is NOT a structural part. It only covers the metal parts of the buckle to keep it from loosening during normal use. If the metal components of your belt buckles are faulty, you should replace it immediately. I'm hopeful it goes without saying but DO NOT print structural components of seatbelt restraints!