Craftsman 34cc string recoil starter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recoil starter for a craftsman 34cc 4-stroke string trimmer. Uses original spring, and pull string.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I have a relatively old Craftsman 34cc 4-stroke string trimmer that broke all the teeth off the recoil gear. I modeled this to be similar to the original, using the original spring and string. Roughly 70mm x 70mm x 36mm in size. This will insert and be held in place using the original internal tooth lock washer.
The middle disc is a tad flimsier than the original but has held together. Some reshaping may be necessary, as I am still working on this model to finalize. Having said that, it has worked for 2 weeks.
I would not recommend PLA. I did not have ABS or Nylon around, or else I would have chosen one of those. I printed the model in PETG, Temp 238 °C, bed temp 80°C, and 55% infill. I will probably print again at 75% infill. I ended up having bed issues and printed the model on its side. When working with the model, I could only get tree support to work in the areas of the model that needed support.