Bambu P1P Pegboard Plate Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A build plate mount/holder for the BambuLab Pegboard Modplate/Enclosure.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 444
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model can hold up to 3 BambuLab buildplates and fits on the BambuLab Pegboard.
The model has a cutout for each plate that is 262mm long, 1.25mm wide, and 28mm high. This ensures easiness when inserting or removing a plate from the model, while holding it in place with very little room to move around.
Both STL and STEP files are provided in the files tab, as well as, a reference .3mf file for part orientation and the SolidWorks file in case you want to make any changes.
I recommend printing straight out of the .3mf file as it already contains all the print settings and part orientations to ensure print success and best quality.
The model was printed on a BambuLab P1P with default 0.20mm STANDARD settings (except for the specified settings below), with BambuLab PLA Matte on the Textured PEI Plate.
Print Settings:
Orient model diagonally (from corner to corner across buildplate).
- Seam position: Back
- Sparse infill density: 15%
- Sparse infill pattern: Adaptive Cubic
- Infill combination
- Enable support (normal auto)
- (support) Pattern angle: 45º
Feel free to remix and share with others if you decide to print this model!