1 / 10
Matchbox Motorcity 500
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This playset contains replacement parts for the Matchbox Motorcity 500, in particular these parts are available for…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 186
- Wydruki
- 0
- Wyświetlenia
- 3873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (42)Powiązane
This playset contains replacement parts for the Matchbox Motorcity 500, in particular these parts are available for printing right now:
- Building walls which you need to create the platforms. The original have holes but that would increase the difficulty in printing so the replacement once has no holes in it
- Street connection plate which you need to connect all the street/lane parts together
- Street driveway which you place at the end of the street/lane. This one needs to be printed with a bit of supports on the sides
Print instructions
The print settings differ per part:
- Building wall: 0.20mm, 10% infill, no supports (You could add supports for the connection-hole in the bottom but it prints perfectly without supports and you'll never see that...)
- Street connection plate: 0.20mm, 15% infill, no supports
- Street driveway: 0.10mm, 15% infill, supports (on build plate only)