XTool F1 8oz Flask (Back side!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the back side plate for the "8oz flask"...
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 293
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the "back side" … In other words you can engrave the back side of the 8oz flask with this plate / jig… ( 8oz / ~ 237ml ). For use with the XTool F1 …
Note:
> You can print this plate in any filament you want. (However, a “tough” filament is recommended)
> 15% infill , 3 walls, honeycomb pattern…
** PLEASE: ** Just like the front plate for the 8oz flask… Note the direction in which this plate fits the F1 to make sure the whole 8oz flask fits with a closed shield.
*********
Other plates / jigs:
Flask (front side) -
https://www.printables.com/model/552065-xtool-f1-8oz-flask-plate-jig
Business card -
https://www.printables.com/model/549500-xtool-f1-business-card-plate-jig
Dual leather patch -
https://www.printables.com/model/550853-xtool-f1-leather-patch-plate-jig
4 inch round coaster -
https://www.printables.com/model/550360-xtool-f1-4-inch-round-coaster-plate-jig
**********
Like it? , please consider donating the small amount of $1 to help me with development and Design… If you own your own business and are going to use this model in your professional office / workshop / SOHO please consider donating $2 … (via: Ko-Fi ) - Thank You!
********
Looking for more XTool F1 related stuff?
Look at all my models! :)