1 / 3
Shooting target repair sticker dispenser belt clip — zdjęcie 1
1 / 3

Shooting target repair sticker dispenser belt clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Since you've already printed the sticker dispenser by Mape, here's an add-on belt clip for it.

Ocena
5 / 5
Polubienia
7
Pobrania
58
Wydruki
2
Wyświetlenia
554
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

So, Mape (@Mape) made an excellent sticker dispenser, of that there is no doubt. Here is a belt clip for it, no need to re-print anything, it adds to Mape's dispenser without modification.
Credit for Peujou (@Peujou_984654) for the idea.
If your layer-adhesion is up to the task, the regular one is what I would suggest you print, looks and works great. V2 is if you are running into problems with snapping between layers and need a better orientation for printing (see pic, left). 

Use whatever infill and perimeters you feel like, but set supports to organic and to support up to 24-degrees, use a brim at least on V2.

Remember not to overtighten the screw.

Tagi