B450M DS3H WIFI IO Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I actually have an Ender 3 v2 Neo but it's not on the drop down. Using the mriscoc firmware. My friend made this STL…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
My friend made this STL because the board he gave me didn't have a shield said I could upload it here as we were unable to find one pre-made.
Using the defaults for PLA will result in PLA spaghetti, see the settings below. PETG would probably be a better material to use.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
Standard
Infill:
60 - cubic
Filament: PLA
Notes:
Print speed 25
Infill speed 35
Bumped the print temperature up from 200 to 210
Bed temp at 60
Retraction enabled
Category: Computer