Vulpes Majora Case w/ Modular Center
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case design for Vulpes Majora by fingerpunch.xyz. It is gasket mounted and fastens with M2 inserts and magnets
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CHANGELOG:
12/14/23 - V2 Updates (Inserts version only):
- Fixed the issue with the 5mm gap between the middle piece and base piece(s) magnets. My bad. Also remove the chamfer directly beneath the middle piece for a more refined aesthetic.
- Adjusted the lid outer chamfer at the top of the ring finger column.
- Added a cutout for the pins of the PER56 to the middle piece.
- Added a reset hole on the underside of the base models.
-----------------------------------------------------------------------------------------
DESCRIPTION:
This is a gasket mount case for the Vulpes Majora by fingerpunch.xyz. There are versions for fastening: one with M2 heatset inserts for the top and bottom pieces, and one with 6mm magnets for top and bottom. The middle piece for both inserts and magnet versions fastens with magnets.
In both versions, the switch plates have holes on the underside for M2 inserts. These are for securing the PCB to the switch plate and are totally optional.
IMPORTANT: The switch plates and middle piece for ‘6 Col - Magnets’ version are NOT compatible with ‘5col - Inserts’ or ‘6col - Inserts’ version.
The dimensions for the heatset insert holes are: 3.4mm diameter opening, that tapers down to 2.8mm at the base of the hole, which is 3.8mm deep. Any insert with these approximate dimensions will work.
M2 screws lengths:
- 4mm-5mm for the switch plate (8- optional)
- 8mm for the base and lid (14 - required)
Inserts: https://www.amazon.com/gp/product/B08T7NDPQC/ref=ox_sc_act_title_1?smid=A17NWEQILMUSOP&psc=1
Magnets: https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN
Rubber feet: https://www.amazon.com/gp/product/B073W1B3G1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1