TKOc-Hermes QLS holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Listed in the Files tab are .stl files for the QLS-compatible TKOc Hermes holster. These files are tested and are…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Listed in the Files tab are .stl files for the QLS-compatible TKOc Hermes holster. These files are tested and are functionally the same as real QLS parts, meaning you can use real QLS parts to attach the Hermes as well. I used Overture Matte PLA. This will hook into standard QLS systems. I am currently using a UBL mid-ride plate. I suggest having a thigh strap too.
Notes:
1 TKOc-Hermes QLS dust cover: added room for Puredeath's blank dust cover add-on
2 Note that there is a pretty harsh break-in period for the holster, I didn't change any other dimensions except to allow the dust cover. That means that most all of the original notes for the holster apply here too.
Hardware required:
3x M5x8mm hex bolts
Category: Sport & Outdoors