1 / 4
Segway-Ninebot KickScooter P100S bar for phone.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You will need a 25.4 mm (1") metal pipe with a length of 255 mm. I used a seatpost from a children's bike. 4 bolts…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need a 25.4 mm (1") metal pipe with a length of 255 mm. I used a seatpost from a children's bike.
4 bolts with nuts and washers M4x25
2 self-tapping screws 3x16 (optional) for fixing the pipe.
I provided holes for them, but I didn’t install them myself, because. and so the pipe is fixed very tightly.
Print Settings
Printer:
Geralkom Vector 200
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
70
Filament:
any Petgany
Category: Sport & Outdoors