EBB42 / LGX-Lite mount for EVA v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact mount for the EBB42 toolboard and LGX-Lite extruder for use on the EVA v3 tool-head
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 2
- Wyświetlenia
- 723
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Using RatOS with the EBB42 toolboard means connecting a chunky USB C cable to the toolboard. These cables aren't designed for applications involving motion, so need a lot of reinforcement and strain relief - the other designs I've seen do this by anchoring the cable going upwards, but that makes the toolboard very tall and causes issues with the top of the V-Core enclosure.
This design solves this problem by letting the cable loop backwards from the toolboard before passing upwards through a cable guide along with the power lines (see photos)
The design is in two parts. A cable guide replaces the cage-like part on the EVA v3, and the cross shaped part attaches to the mounting holes on the side of the LGX-Lite, it will not work with other extruders! The USB C connector can be cable-tied to the mount, I'm using an amazons basic USB cable, but if your cable is different you may need to shim either the cable guide or the toolboard mount with washers to get the parts to align. The toolboard is mounted to the printed part using M3 hex spacers, you need around 4mm of total height (whether that's with a spacer or a stack of washers or similar)
In the photos I've sleeved the cables but it's probably not necessary, I just like the green.