Kim Dokja Bookmark - ORV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2-color bookmark of the character Kim Dokja from ORV. Works even on printers that can only print one color at a time.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 669
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
2d bookmark of Kim Dokja from Omniscient Reader's Viewpoint. Image taken from chapter 161 of the webtoon.
This model prints well on, and was designed for, printers that can only print one color at a time. This is because it is so thin that it can print one file over another that was already on the buildplate without the nozzle bumping into what was already there.
By far, the easiest way to make this is by using the gcode files I uploaded (though that will make 2 of these at once). To make this using those, download both, print the file labelled white, swap out your filament color completely while keeping the white part on the buildplate, then print the black part over it. Once done, let the buildplate cool before removing the bookmarks to avoid the plastic bending.
Alternatively, if you want to slice it yourself, position the three components of the model, white, black, and silhouette, such that they are all aligned on the x and y axes, but scaled and translated accordingly on the z axis so that the white part is 2-3 layers tall, the black part is the same height as the white part and in the same spot as it, and the silhouette part covers both of them on the x and y axes, but floats above the buildplate the height of the other two components, taking up about 5-8 layers. Then, individually slice the white part, then slice the black part and silhouette together (or apart if you want the back of the bookmark to be a different color)