1 / 1
Death Star Christmas ornament (two halves, no glue) — zdjęcie 1

Death Star Christmas ornament (two halves, no glue)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Christmas ornament in the form of Star Wars Death Star that is easy to print and requires to glue.

Ocena
5 / 5
Polubienia
30
Pobrania
162
Wydruki
3
Wyświetlenia
641
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to create a Death Star that was easy to print and at the same time required no glue at all. This is the result: print the two parts and then screw them against each other using the screw in the model. Please note that this is not suitable for commerical uses since the Death Star is copyrighted material. Have fun!

Printing notes: no particular care needed, just use a .15 layer eight to make sure the screw has no issues being printed because of the angle of the turns. Printing it at 50% also works.

Tagi