Foam Knight XC - Metric Version

We are situated on the southernmost tip of Africa, thus we couldn't get hold of the original hardware kits produced by Foam Knight. This prompted us to modify the files to allow for the usage of metric hardware (bolts, threaded rod, nuts, etc).

We also only concentrated on the Elite configuration since we had no interest in the Mega and Rival options.

Files suffixed by 100 should be printed solid.

Plunger tube - 38mmx1.6mm  177mm Length
Barrel 16mm x 1.5mm (ID13mm) - 302mm Length
8mm brass tube (gas pipe) - inserted into the bolt - 101mm
Ramrods - 375mm - can use 12mm or 12.7mm flatbar
Primary spring - full length K26 works fine, but it is a tough prime

A relatively full list of hardware required:
- M3x14 x 1 socket cap
- M4x10 x 2 flat socket cap countersunk
- M4x16 x 4 flat socket cap countersunk
- M4x12  x 4 hex socket cap
- M4x18 x 1 + M4x20 x 1 hex socket cap
- M4x25 x 2 hex socket cap
- M4x30  x 1 socket cap
- M4x25 x 1 hex head, not socket cap
- M3 square nut x 1
- M4 Nylock x 9
- M5 Nylock nut x 7
- M5 Dome Nut x 7

Orings

• 016 x1 15.6mm x 1.78mm

• 112 x1 12.37mm x 2.62mm

• 113 x1 13.94mm x 2.62mm

• 115 x1 17.12mm x 2.62mm

• 121 x1 26.64mm x 2.62mm

• 123 x3 29.82mm x 2.62mm

• 907 x1 13.46mm x 2.08mm