1 / 1
Spool Holder for 26x7x5 Bearings (for Bambu X1C/P1S side mount spool holder v2)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had 26x7x5 bearings around here and I need this adaptation for this magnific side mount spool holder for Bambulab X1
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 2104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (38)Powiązane
Follow the same instructions from https://www.printables.com/es/@BC76, work pretty well. Thanks.
- I used 0.20 layer height @ 50% infil with PLA+
- 4 walls
- 4 top and bottom layers
- With supports (below)
