Rectangular, asymmetric funnel for component bins, parametrizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A funnel to help fill small component bins, with a rectangular narrow end and an optionally asymmetric wide end.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
What it is
A funnel with a rectangular shape, so that it fits in a small component bin. The funnel is optionally asymmetric, which means that the wide part is not sloped on one side. If the component bins have a lid that opens up to 90 degrees, the asymmetric funnel fits well. The various dimensions of the funnel are adjustable with the OpenSCAD customizer.
Why I made it
For prototypes and repairs, I use small bins for SMD components. When a bin is empty, I refill it from a reel (or a stretch of "cut tape"). For that purpose, a funnel is really convenient.
The component bins have a lid. A standard symmetrical funnel will not fit, because the lid can only rotate roughly 90 degrees. Hence, I designed my own.
The container bins that I use a fairly common, but if you happen to use different bins, get the OpenSCAD design file, and adjust the parameters.