Upcycle Turntables for 3DSolutech and Prusament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are pretty quick prints that get combined with a 408 bearing to turn a filament spool half into a lazy susan of…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 96
- Wydruki
- 2
- Wyświetlenia
- 1338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
These are pretty quick prints that get combined with a 408 bearing to turn a filament spool half into a lazy susan of turn table. The models let you turn a 3DSolutech 3 part spool into a nice painting turntable. Optional cover for the top surface.
I've been using a bunch of these turntables - and recently used up a spool of Prusament filament. It's an even nicer turntable - but instead of making two similar models, I chose to layer the models together. To get a turntable for the Prusament, build the turntable adapter for 3D solutech, and then build the Prusament adapters. Saves a lot of plastic.
For the 3d solutech 3 part spool, just print the turntablefor3dsolutech parts. Optional stage to make the top nicer.
For a prusament spool half, print the 3d solutech pieces (no stage) and then the prusament adapter. The 3D solutech turntable adapter turns upside down and powers the prusament turntable. The hole in the middle of the prusament spool gets filled by the snap together parts - then slide in the 3d solutech pieces, and your are in business.
Print instructions
printing these is easy. Use whatever infill to save plastic you like. No supports needed. Just print the pieces you want for the situation you are in. You'll get some nice usable turntables, with a minimum use of filament. And a 408 bearing.