The Batman Who Laughs Bust (pre-supported)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bust of The Batman Who Laughs.
- Ocena
- 4,917 / 5
- Polubienia
- 324
- Pobrania
- 1604
- Wydruki
- 14
- Wyświetlenia
- 8423
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is one of those busts with arms. I know there's mixed opinions about them, but in the case of TBWL I think they are almost a must. (There is however a version without sockets for the arms).
If you want to print the entire thing the usual base, but also the arm parts, and spikes:
The spikes can be slotted into any of the head band sockets, but if you want as good fit as possible, follow the lettering on the spikes and the slots:
Resin printing
It's a bit of a pain in the ass and time consuming, but I know you good patrons like pre-supported files, so yet again I have provided both Lychee Lite files (under Other Files down below) and pre-supported hollowed STL files. All are in SMALL (Elegoo Mars-sized) and MEDIUM (Elegoo Saturn-sized) printer formats. As always, I recommend you use Lychee, the (as of yet) best resin printer slicer out there.
FDM printing
Printing on your FDM machine you might want to go with the armless bust version because the hands are very slender and tall, so it might be hard to get a great result without the nozzle bumping something over! I've indicated some places you want to place supports, but you'll have to use some own discretion for this depending on how well your printer handles overhangs, bed adhesion, etc.
