Acer S242HL Vesa 75 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After my Acer display came down with another vesa holder i threw together this design with stronger take-ups.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After my Acer display came down i threw together this design with stronger take-ups.
Printed with 4 wall lines and double infill lines.
There is room for improvement, i'm sure. I'ld like to reduce the amount of filament to be used in a future installment. For now this is enough for me.
i had this in use for about 2 years and 10 months when i noticed a crack at the transition from the plate to one take up. Might be because the monitor is hung at an angle.
Print Settings
Printer:
Creality Ender 3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%, double Lines
Filament:
Grey
Notes:
I cleaned out the holes with support with a 5mm drill. it is a pretty tight fit.