USB hub desk mount (RSHTECH 16 port)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under desk mount for an RSHTECH 16 Port 100W USB Hub
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Under desk mount for a RSHTECH 16 Port 100W USB Hub.
I couldn't find a way to drill through the aluminium case in a way that allowed me to mount it directly under a desk, so I removed the plastic end cap (with the power and data connections) and created a mount that it can slide in/out of (the printed endcap with the power/data cables keep it in place once attached).
If you do not wish to modify the hub (remove the endcap), I have a version without the printed endcap. It should still hold in place provided you have a snug fit, or you can let the usb cables keep it in place :)
If you do want to modify the usb hub you can remove it from its metal housing by removing all 16 power buttons. They will pop right off if you lift them straight up with some soft pliars. Then it should slide right out of it's aluminium case.
Amazon Page: https://amzn.to/3OE3giX
-Printed on CR6 Max
-Printed in PLA+
-No supports needed