TPU Round Grommet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This TPU grommet is designed for holes with a diamter of 31.5mm (though it might also work on 31-32mm holes.
- Ocena
- 0 / 5
- Polubienia
- 92
- Pobrania
- 300
- Wydruki
- 2
- Wyświetlenia
- 3235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
This TPU grommet is designed for holes with a diamter of 31.5mm (though it might also work on 31-32mm holes, didn't try this) with a sheet thickness of 3mm. I used this grommet for the back panel of my Ikea LACK enclosure.
The grommet has been sliced in half, meaning you need to print the included parts twice for one grommet. Support is recommended for a clean surface finish.
Support
If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: https://s.click.aliexpress.com/e/_oFT8Gq6
Whenever you buy something through this link, I get a small kickback without costs for you ;)
Thanks for your support!
Print instructions
rinter brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.20mm
Infill:
15%
Filament brand:
ColorFabb
Filament color:
Black
Filament material:
nGen Flex