Mercedes-Benz odometer gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
gear for odometer in 80'-90' Mercedes-Benz vehicles with a mechanical odometer.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 224
- Wydruki
- 0
- Wyświetlenia
- 1126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a gear for odometer in 80'-90' Mercedes-Benz vehicle with a mechanical odometer. Original gear is made out of resin which is dissolved by grease. Since the gear is 6.6mm in diameter and has 15 teeth precise printer (SLA) is crucial.
UPDATE: It looks like fit is not good and through given tolerances when need to be slightly increased in size. Please add 5 to 10% to the current size.
Print Settings
Printer Brand:
Formlabs
Printer:
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.05
Infill:
25%
Filament: Formlabs Grey Pro
How I Designed This
I did a photo under microscope with basic measurements in microscope SW. Then I recreate involute profile of tooth and made an axial pattern.
Category: Automotive