TL866 II EPROM Programmer and accessories box with lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box with lid for the popular TL866 II EPROM programmer.
- Ocena
- 4,667 / 5
- Polubienia
- 11
- Pobrania
- 112
- Wydruki
- 5
- Wyświetlenia
- 949
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A box with lid for the popular TL866 II EPROM programmer. Helps keep all the accessories together and saves you having to work out how to get it back into the cardboard box it came in. Lid is pretty loose, so best kept in a drawer somewhere. Otherwise wrap a large rubber band round it.
STL files are provided for the lid and base, along with a Fusion360 file in case you want to customise your own.
Print instructions
Printing is easy, the STLs are the correct way up to print. These will print on the standard Prusa Mk.n but probably too big for the Mini. I used a layer height of 0.2mm and a gyroid infill of 10% which worked well from me. PETG was used for these prints, however PLA prints will keep their shape a little better.
The Fusion360 file is provided in case you want to customise the box in any way.