1 / 4
Halter für Schwerlastregal / Holder for heavy duty shelf — zdjęcie 1
1 / 4

Halter für Schwerlastregal / Holder for heavy duty shelf

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Halter für Schwerlastregal mit einem Lochabstand von 25mm mit einer Aussparung für einen Vierkantstab 20x20 mm bzw.…

Ocena
0 / 5
Polubienia
6
Pobrania
26
Wydruki
1
Wyświetlenia
340
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Halter für Schwerlastregal mit einem Lochabstand von 25mm mit einer Aussparung für einen Vierkantstab 20x20 mm bzw. Rundstab Ø15mm (Baumarkt).

Bei hoher Belastung eventuell mit einem Kabelbinder absichern.

Holder for heavy-duty shelf with a hole spacing of 25mm with a recess for a square rod 20x20 mm or round rod Ø15mm (DIY store).

In case of high load, possibly secure with a cable tie.

Print Settings

Printer:

Sidewinder X1 / I3 Mega

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament:

Other PLA / PETG

Other


Notes:

Any material does the trick.

Category: 3D Printing

Tagi