Logitech C270 Camera Mount for LACK V2 Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another C270 Cam Mount for the LACK V2 enclosure.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Yet another C270 Cam Mount for the LACK V2 enclosure.
Wanted it to blend in with the original parts again, and have my cam mounted in vertical orientation.
But to enable others having it horizontal, i started with this base mount for the cam. This way one can slightly adjust X and Y orientation in the vertical version.
And once i got there, i also added versions that you can either glue or screw anywhere along the LACK leg, so you can arrange the cam somewhere along the center of the buildvolume for example.
Screws are M3x18 from the spare bag of the MK3S+.
Nuts are M3 (of course) from the spare bag again.
The screws of the "anywhere" mountable version should be 3-4mm panheads.
Print instructions
The vertical parts need supports around the lower holes and upper mountpoint. Paint-on supports should work just perfect.
Thre rest should be printable without.
Default 0.2mm quality profile should be fine. Maybe 0.15 to improve the holes and nuts overhangs.
The G-Code is for Prusament PETG on the MK3S