Trellis Hanging Lampshade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Faux-woven lampshade styled after IKEA's SYMFONISK bamboo lampshade.
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 331
- Wydruki
- 7
- Wyświetlenia
- 1790
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
The inner bracket ring of the lampshade measures 40mm, which should be compatible with most standard hanging E26 light bulb sockets. The lampshade measures roughly 150mm in diameter and 175mm tall.
This should print perfectly without needing any supports as long as you print with the bracket on the build plate. Printed with 15% infill and .20mm layer height on a Prusa MK4 in SUNLU Matte White PLA and Colorfabb Woodfill PLA.
The lampshade is designed to allow single-extruder printers to do color changes for the top and bottom brackets, allowing for an effect similar to the example photos. A pre-sliced G-Code has been added that includes color change points for the MK4.
Inspired by IKEA's SYMFONISK bamboo lamp shade.