BMW R1150GS Adventure plexi mounting brackets (outer part only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Windscreen plexi mounting brackets for BMW R1150GS Adventure – the outer parts only.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 880
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
If you managed to crack your original Adventure mounts, this is a model for you. If you're looking to upgrade your standard GS with Adventure plexi, then this is NOT a complete model – the inner (larger) brackets aren't here. This model contains only the outer brackets.
How it performs?
PLA version cracked after ~5000 km, but still remained on the bike. PET-G still going strong after couple thousands km. ASA version still remains to be tested.
Printing and post-processing
I've printed couple of them in PLA, PET-G and ASA with 3 perimeters, layer height 0.2 mm and 40 % infill.
Post-processing for ASA was done in two phases phases:
- Sanding
- Acetone vapour smoothing
Mounting
Same hardware as for the original: two torx screws and two aluminium tubes are used as standoffs between the outer and inner bracket.