Rear mount for Supernova E3 tail light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bike mount for the E3 tail light intended for seat post attachment. The mount screws into the rear rack/fender mounts.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I could not find a suitable mount for my Supernova E3 Rear light, the ones that are out there are intended for the rack mount lights.
This mount is inteded for the E3 light that mounts to the seatpost, and keeps the stading orientation of the light.
Preferably printed in ASA or PETG.
You need a m3 bolt and nut, I have used a threaded M3 short insert insted of a nut but both works. The m3 bolt that is included with the light works even if it is slightly too long.
You also need a M5 bolt to attach to the bike.
The tolerances are tight for the bolts, this is by design