Nuka-Cola Bottle Koozie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nuka-Cola bottle koozie designed for longneck and heritage bottles.
- Ocena
- 4 / 5
- Polubienia
- 50
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 889
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A Nuka-Cola bottle Koozie. I have printed other peoples can koozies and love the idea of thematic koozies. So, I decided that if I want a Nuka-Cola I need to drink out of a bottle. This design will accommodate a longneck bottle as-is, when using the included spacer, it will fit a heritage bottle as well.
For best results I recommend printing with supports, this was really only for the threads. The label will probably print fine without supports. I printed this at .2 for the images above, but for proofing printed at .24 without issue. Printed at %5 infill three walls. I did not need any post processing with this print, but I fear that the tolerances may be too tight for some in regard to the threads.