Lunar lander base for Moon Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've made a lunar lander inspired base for the 8 inch moon lamp. I've printed it in copper PLA.
- Ocena
- 5 / 5
- Polubienia
- 209
- Pobrania
- 925
- Wydruki
- 13
- Wyświetlenia
- 6390
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've made a lunar lander inspired base for the 8 inch moon lamp.
I've printed it in copper PLA.
I was inspired by the Apollo 11 Eagle lander.
Print it up side down and use the socket template to build your own socket for E14 or E27.
For top and bottom layer I used "Octagram spiral" for a nice symmetric effect.
The Moon sits on the base, therfore I made the whole in the moon bigger (~66mm).
Print Settings
Resolution
0.2mm or thinner
Supports
Yes
Infill
20%
Rafts
Doesn't Matter
Filament
Geetech PLA Copper
Notes
Print up side down.
To modify the socket template for your needs, please edit the socket-template in the 3D editor of your choice. In my case, I've modelled the lamp socket in 3D and used it to cut a hole into the socket-template. Finally I've cutted the socket-template in two halfs and printed it.