LED Strip Cover / Diffusor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Strip Cover / Diffusor - 30 x 100mm
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 843
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LED Strip Cover / Diffusor - 30 x 100mm
When you have dark computer case and you want to see what is inside.
Parts are 100 mm long and 30 mm high/deep.
First I tested with smaller version and light was not good enough.
When motherboard has possible to control ARGB Led strip then is possible have different effects.
Pins have 4mm diameter and are 30 mm long. Can be printed vertically.
After print I propose to “clean” holes (are 4.2mm) for pins with M4 long screw. Simply push and pull screw 2-3 times. Not drill because hole will be to wide and pins will became loose.
It is modular so print many as you need and just connect by using pins and put LED strip inside.
I use MK3, material PETG, 0.3 mm layer, but I think 0.2 or 0.1 could be better.