Countersink Drill Bit Case (Magnetic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case designed for the Snappy Tools Hex Shank Tapered Drill Countersink bits…
- Ocena
- 4,75 / 5
- Polubienia
- 51
- Pobrania
- 210
- Wydruki
- 4
- Wyświetlenia
- 1223
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Case designed for the Snappy Tools Hex Shank Tapered Drill Countersink bits (https://www.amazon.com/gp/product/B01ARZ4QC0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1). Case closes magnetically and bits are held inside magnetically.
Print instructions
Printed Materials:
Case Bottom.stl
Case Top.stl
Non-Printed Materials:
5 - 6x3mm magnet (I used the magnets found at https://www.amazon.com/gp/product/B07MV2MKD5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
3 - 10x3mm magnet (I used the magnets found at https://www.amazon.com/gp/product/B07MV2MKD5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
1 - Paperclip (used for hinge)
Instructions:
- No supports needed.
- Press the 6x3mm magnets into the corner holes so they attract each other when the case is closed.
- Press the 10x3mm magnets into the back of the bottom case in alternating orientnation (North up, South up, North up). This helps the magnets not 'fight' each other.
- Press a 6x3mm magnet into the allen key holder in the bottom case.
- Straighten out a paperclip and make a 90 degree bend at the end ~4mm long. Align the top and bottom case and insert the paperclip all the way through both halves making the hinge. Cut the excess paperclip and bend to lock the hinge in place.