Replacement Trimmer Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to replace the original wheel of my Ryobi 40v cordless trimmer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The original wheel of my trimmer was getting worn down by use and it no longer had any grip so it would just slide around making a really inconsistent edge. I designed this using Fusion 360's topology optimization to get the best strength with the lowest material usage, plus it looks sick. I printed mine using Yardworks trimmer line (High Strength Nylon) for its high strength proprieties.
Print settings:
Support: Yes
Resolution: 0.16
Infill: 35% Gyroid
Filament: Yardworks universal trimmer line 1.65mm round
Notes: The default orientation is best for printing, but it leaves the supported side facing out which doesn't look the best.
I had to use two washers to get a snug fit.
If you have any questions, feel free to ask.