Cable clamp lock down
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tight-fitting (possibly waterproof) seal for two (or more) cables
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I used this to secure an AMS cable power cable in an enclosure. I'm worried about sound, so I designed this to press-fit the TPU parts snugly to create a very tight seal. I've not tested for water tightness, YMMV.
This is designed to fit over top of a 1.25" hole. Parametric model included.
Assembly
- Put your cables through all the holes first
- TPU Gasket
- Back
- TPU plug
- Shell
Getting the cable into the plug can be tricky. I made some temporary wedges with plastic sheets I had lying around.
Push all the parts together once your cables are threaded where you want them to be. Then attach it to a wall through the holes. I used 2-½" sheet metal screws.