1 / 4
Ender3 Screen Surface Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender3 screen mount that provides top-down viewing.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 225
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to cleanly mount my Ender3 screen/control knob flat on a surface for top-down viewing. This design accomplishes that task. The screen gets mounted into the main body, while the clip gets mounted to a surface using #6 wood screws.
Parts Needed
- screen-mount-main-body.stl
- screen-mount-clip.stl (print on its side for best strength)
- M2x12mm screws (x4)
- M2 Nuts (x4)
- M2 Washers (x8)
- #6 Wood Screws (x2)
Assembly should be fairly self-explanatory. Once the screen is mounted, the main body/screen assembly can be clipped onto the clip that's been mounted to a surface. To remove, gently squeeze the top and bottom of the case and lift one side off the clip, then the other.