Lobo Bust (pre-supported)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bust of Lobo.
- Ocena
- 5 / 5
- Polubienia
- 138
- Pobrania
- 904
- Wydruki
- 13
- Wyświetlenia
- 3652
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Information
This guy comes in two versions. One that is quite wide, and one with the arms chopped off. The armless version can be nice for those who don’t have very wide printer beds as it gives you the chance to scale it up a bit to gain some height. Don’t don’t forget to also scale up the base.
As often is the case, there’s a main bust part, and a base, that are printed separately.
Printing instructions
FDM
No supports should be needed!
Resin
The resin download comes with pre-supported files for small sized printers (like the Mars) and medium sized printers (Saturn, Mono X). It comes in two formats:
- Lychee Slicer Lite (.lyt) files, that you can edit the supports yourself in if you feel you want to make any changes before printing (this is the recommend way), and
- Pre-supported and pre-hollowed .stl files. I don’t recommend these because if you use anti-aliasing you’ll be applying it to the supports as well, which makes the connecting area much less sturdy and increases the chance of print failure.
There’s of course also the regular STL files there if you want to do all the slicing yourself, or print at a much larger size using something like the Phrozen Sonic Mega 8K.