91mm Swiss Army Knife Replacement Scales
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are replacement scales for 91mm Victorinox Swiss Army Knives.
- Ocena
- 4,909 / 5
- Polubienia
- 104
- Pobrania
- 660
- Wydruki
- 8
- Wyświetlenia
- 5075
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
These are replacement scales for 91mm Victorinox Swiss Army Knives. You can edit the .STEP files to add your own custom text or logo. Adding a filament swap at the first layer of the logo/text really makes it stand out.
The holes are designed to be interference fit with the knife's rivets, so they will likely not sit flush with the side on the knife if you only press them on by hand. I recommend using a clamp or a vise to lightly force the scales over the rivets.
The more detailed custom scale designs I have created are all located together in this collection: https://www.prusaprinters.org/social/118090-3dprintedman/collections/64324
Print instructions
Print with the holes face down. There are no critical slicer settings for these parts, just make sure they do not warp. I would recommend a 0.15mm or smaller layer height for best results.
You can find additional info about how to install these replacement scales on my website at 3dprintedman.com!