1 / 2
DYSON S.S. HAIR DRYER UNIBODY STAND — zdjęcie 1
1 / 2

DYSON S.S. HAIR DRYER UNIBODY STAND

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slick, Sturdy, Ergonomic, Easy to Clean, Easy to Print, and Assembly-Free

Ocena
0 / 5
Polubienia
37
Pobrania
402
Wydruki
1
Wyświetlenia
1623
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I need a stand for my hair dryer to keep it off the countertop from getting wet or scratching the surface.


But I have trouble admiring the stand design by Dyson or anything like that. They displayed all the attachments in front of me, cool but not practical. Including myself, most of the users around me usually stick to one attachment or don't use any attachment at all.


So I came out with this design:
· Unibody, easy to print without assembly, no screws or heatset insert
· Hairdryer can be placed back on the stand without removing the attachment
· Strong and durable, can be printed with any material and can resist creep
· Ergonomic while placing and picking up
· Easy to clean
· Close to the minimalist style

Printing:
Material: any
Wall thickness: 2 loops = usable but a bit soft
                           3 loops = good enough
Infill: Gyroid, no less than 15%
Bed size: at least 256x256 mm
Support: required, tree support recommended

Printing Orientation: Side on the bed
Brim: Inner and Outer

Let me know if you like this design. I'm interested in seeing more got printed :)

 

 

 

Tagi