Circle Jig for Makita RT0700 Router (remix, splitted parts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Circle Jig for Makita RT0700 Router (remix, splitted parts)
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 1164
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
With the permission of the autor, c4t0r, here is my remix of his design.
Same function, same size, everything.
I did this remix to be even easier to print.
3 parts, no supports needed, no aliminium part needed
The only tricky part is gluing the 2 big parts together, well aligned !
If you fail this part, you won't be able to use it properly.
I might add alignement pins if needed, but didn't fell the need at this point
After that, all you need is 2 hex M5 screw, glue them both in place.
For ease of use, print c4t0r knob, insert M5 nut, and you're free to go !
All the credit goes to c4t0r.
Thanks for letting me remix his part.
Category: DIY