Smaller & stronger Pikachu Low Poly remastered
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a better kid-friendly remix of the wonderful low-poly Pikachu remastered by @AgustinFlowalistikAr
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 293
- Wydruki
- 7
- Wyświetlenia
- 925
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 50% version of the low-poly Pikachu remastered, by @AgustinFlowalistikAr
The original model has a weakness at the base of the tail, that made it prone to break if used a little too much. Furthermore, the original model is kinda big.
My kid (and I) loves this Pikachu, but a 50% sized one is far better suited to play with. And being a kid (not very careful), the tail used to snap quickly.
I remixed it to be at 50% size and with a little low-poly reworking of the base of the tail, to be stronger. This model has not yet been broken.
You can print it with no support. I print it without a brim, but you have to be confident in your printer.
You can print it with very little infill (10% is working well), but try with more of you want it to be stronger (I did a 30% infill version, it is quite strong for such a toy).