DIN rail container for electrical box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To store mobile elements inside an electrical box
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Depth is about the maximum a standard electrical box (at least the ones we have in France) will accept without hitting the cover.
It will fit objects up to around 82*82*35mm (height can go as higher if you have room above ofc)
It doesn't clip on the DIN rail so it's not locked in place but fits somewhat tightly.
I'm using it to store the optical fiber converter supplied by SFR in a secure way.
Print upside down like on the pic to be able to print without support. Your slicer's autorotate should place it that way. When rotated that way you can cut the top of the object if you want space for wires to come from the bottom/back.