Pumkaboo with LED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hollow Pumpkaboo with glowing eyes and removable top
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 238
- Wydruki
- 0
- Wyświetlenia
- 921
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*This is a single colour print*
The head is removable, and depending on the size you print it, you can fit an LED inside to make the eyes light up.
I taped a piece of orange cellophane to the inside of the eyes to give it that orange glow.
I've uploaded the whole models, as well as the pieces I cut in half for easier printing.
I also made a base for the pokemon to stand in to keep it upright.
Dimensions of my print:
With lid on, the figure is 15 cm tall and 18 cm wide
Pumpkin alone is 6cm tall and 10 cm wide (large enough to fit a standard electronic LED tea light).