1 / 5
Vinyl Cutter Knife Holder CR10S-pro (and many other) — zdjęcie 1
1 / 5

Vinyl Cutter Knife Holder CR10S-pro (and many other)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A drag knife holder for the CR10S-Pro. I use the holes in the extruder case to mount the holder.

Ocena
0 / 5
Polubienia
18
Pobrania
64
Wydruki
0
Wyświetlenia
468
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

A drag knife holder for the CR10S-Pro. I use the holes in the extruder case to mount the holder. The design uses threaded inserts.

Instructions on how to use the software side can be found here:

https://www.instructables.com/Use-3D-Printer-As-a-Plottercutter/

You will need Inkscape and the suggested plugin. Keep in mind the plugin is not compatible with the newest version of Inkscape, so download the latest version before 1.0.

The hole for the blade holder is when printed a bit too small. This is on purpose so use a file to make the holder fit. This is done to prevent too much slack in the placement. The holder must only go up and down.

I use a Cricut low tac cutting mat on the build plate, to keep the vinyl flat. I have a magnetic base and used an old build plate and some spray glue to fix the cutting mat to the build plate.

The clip is to raise the blade holder high enough that you can leave the whole thing while printing.

You will need the following additional parts:

2 x M3 x 12 mm screw

2 x M3x30-35 mm screw

2 x Washer M3

2 x spring 7,3mm x 14,5 mm ( Can be another size, just try)

4 x Threaded insert M3

1 x Blade Holder like this one: https://nl.aliexpress.com/item/32797525723.html?gatewayAdapt=glo2nld&spm=a2g0o.9042311.0.0.27424c4d4GrdYT

If you have any suggestions or improvements, please let me know.

Print Settings

Printer Brand:

Creality

Printer:

CR10S PRO

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: FormFutura Tough PLA Gray


Notes:

I used 3 perimeters for this print to add strength.

Category: 3D Printer Accessories

Tagi