1 / 6
3030 Mount for the BTT SFS V2.0 Smart Filament Sensor — zdjęcie 1
1 / 6

3030 Mount for the BTT SFS V2.0 Smart Filament Sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for the BTT SFS 2.0 using standard 6mm t-bolts or to add to existing bolts via the keyhole design.

Ocena
5 / 5
Polubienia
17
Pobrania
195
Wydruki
1
Wyświetlenia
1301
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The design was intended to use M6 12mm bolts with drop-in nuts to attach the mount to  3030 extrusion.  There is also a variation that includes keyholes so that it can be added to existing t-bolts.  M3 10mm bolts are used to attach the sensor to the mount.  There is also an access hole for what appears to be a trim screw on the back of the sensor.  I wasn't sure if it was needed but I added it anyway.

Edit: Added a 6mm variation of the keyholed design as well a design with a simple mounting hole.

Tagi