Working Nintendo Switch Lite Charging Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nintendo Switch Lite Charging Dock. Only for charging. *THIS WILL NOT CONNECT YOUR SWITCH TO THE TV*
- Ocena
- 4,75 / 5
- Polubienia
- 79
- Pobrania
- 471
- Wydruki
- 3
- Wyświetlenia
- 2879
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Nintendo Switch lite dock for charging only. Your Switch Lite will NEVER be able to connect to the TV.
Print Settings
- layer height - .2 (Doesn't matter)
- Nozzle Diameter - ≤.4 (Logo will not Work above .4)
- Infill - If you can do a higher infill to make it heavier
How to Assemble
First off you will need a USB-C charger like for your phone (NOTE: Official Nintendo chargers will not work for this.)
After you print out the 2 pieces you will need to put to charger cord through the slot than close the 2 pieces together. it should be a good fit but may be a bit loose so some Superglue should do the trick. The fit for the cord will probably be a bit loose (In case of varying sizes of the charger). Again some Superglue should hold it in Place.