XMax v3 Pro carry case with screen and USB openings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4lan9's XMax V3 Pro carry case with openings, so vape can be used and charged
- Ocena
- 3 / 5
- Polubienia
- 21
- Pobrania
- 196
- Wydruki
- 4
- Wyświetlenia
- 1405
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I don't carry my vape around, but I still wanted a case to keep it safe when on my desk. The screen and buttons can be used normally and the device can be plugged in and loading. It's a good idea to use PETG or other heat resistant materials, though PLA seems to do alright as long as it's not being used for too long at a time.
I found that with some filaments the print comes out just a little bit too big, but not drastically.
Added an alternative version with a flat bottom for easier printing.
Requires cap: either from the original model or the additional cap I've made for use without a mouthpiece.